How to improve safety compliance at industrial sites

Industrial safety compliance represented by a protective hard hat, with connected elements for hazard checks, permits, worker training and safety monitoring.

Key takeaways

  • Industrial safety compliance requires regular hazard checks and verification that site controls are working.
  • A permit to work system records task details, approvals, and safety precautions for specified hazardous work.
  • Digital safety tools help workers report hazards and give supervisors a way to review open actions.
  • Computer vision safety monitoring can support selected visual checks, including PPE monitoring, subject to camera coverage and site conditions.
  • Industrial safety software can connect field reports with safety teams and support the review of corrective actions.

Industrial sites manage safety risks across production, maintenance, and contractor work. A factory may have written safety procedures and inspection records. These documents alone cannot confirm whether hazards are being controlled during a shift.

The consequences of gaps in safety management became clear at Didion Milling’s dry corn processing facility in Cambria, Wisconsin.

On May 31, 2017, combustible dust explosions and fires killed five employees and seriously injured another 14. The US Chemical Safety and Hazard Investigation Board (CSB) investigated the incident. Its report identified failures involving hazard recognition, engineering safeguards, management of change, incident investigation, and emergency preparedness.

The investigation found that Didion had experienced previous fires and process upsets but had not put effective measures in place to prevent recurrence. It also found that a temporary process modification had not been adequately assessed or communicated to affected workers.

The incident shows how gaps across a safety management system can expose workers to serious harm. Organisations need to check whether safety controls are in place, whether workers understand them and whether reported problems receive proper attention.

What does safety compliance mean at an industrial site?

Industrial safety compliance means meeting the legal, regulatory and internal requirements that protect employees, contractors and other people affected by an organisation’s operations.

The requirements depend on the industry, location, and work being performed. A chemical processing plant may need to manage process safety and hazardous substances. A manufacturing facility may need controls for machine guarding and hazardous energy. A utility operator may have additional requirements for electrical work and access to restricted installations.

Industrial safety compliance covers four main areas:

  • Regulatory compliance: Meeting applicable occupational health and safety laws and industry requirements.
  • Procedural compliance: Following approved safety procedures, risk assessments, work instructions, and permit requirements.
  • Operational compliance: Checking that required controls are present and working at the job site.
  • Management accountability: Assigning responsibility for hazards, corrective actions, inspections, and training.

A company may have an approved equipment isolation procedure. It still needs to confirm that the correct energy sources have been identified, isolation has been applied, and the required verification has taken place before maintenance begins.

The OSHA Recommended Practices for Safety and Health Programs cover management leadership, worker participation, hazard identification, hazard prevention and control, training, programme evaluation and contractor communication. They offer a useful reference for organisations reviewing their safety practices.

Why does safety compliance break down in industrial environments?

Industrial facilities deal with changes in production, equipment and staffing. Contractors move between work areas, and different teams take over during shift changes. Each change can affect the risks workers face.

Several gaps can make safety compliance difficult to maintain.

Risk assessments become outdated

A risk assessment reflects the equipment, materials and work conditions considered when it was prepared. A change to the equipment, work sequence or surrounding area may introduce a new hazard.

A temporary production-line modification could affect material flow, equipment loading or access arrangements. The organisation needs to assess these effects before the change is put into use.

Previous incidents do not lead to corrective action

A minor fire, equipment failure or near miss may be treated as an isolated event. If the organisation does not investigate the causes, similar conditions can remain.

Repeated events may also become accepted as part of routine operations. Workers and supervisors may stop reporting an abnormal condition when earlier reports have not led to action.

Inspection findings remain unresolved

Inspections can identify damaged equipment, unsafe access routes and missing safeguards. Recording a finding does not remove the hazard.

The organisation needs to assess the risk, assign an owner, set a corrective action and verify that the work has addressed the problem.

If the same finding appears in later inspections, management needs to review why the earlier response did not prevent it from recurring.

Workers do not receive information about changes

A process modification may be approved by one team and carried out by another. If affected workers do not receive updated information, they may continue working from an outdated procedure.

This is a concern during shift changes. Incoming workers need to know which equipment or processes have changed and whether additional precautions apply.

Safety performance is judged through paperwork

Completed training records, signed inspection forms and closed action items show that activities have taken place. They do not confirm that workers can perform tasks safely or that engineering controls are working.

Management needs to review the quality of safety activities and check whether they reduce exposure to hazards.

What the Didion Milling explosion reveals about industrial safety compliance

The Didion Milling incident is an important case for industrial safety teams because the CSB investigation connected several failures across the facility’s safety management system.

A temporary process change introduced an inadequately assessed risk

About four weeks before the explosion, Didion submitted documentation for a temporary change to its bran processing system.

The modification connected two cyclone systems so they could share a conveying blower and transfer line. The change was intended to increase production capacity.

The CSB found that the change documentation did not adequately assess the effects of moving more material through a shared line. It did not properly address the risk of material blocking the line, affecting airflow, or creating deposits inside the system.

The temporary setup had been put in place and reversed several times during May 2017. It was in use again on the day of the incident.

Night-shift operators had not received adequate information about the configuration. When they investigated smoke and a possible smoldering condition, they did not have the full information about the connected equipment.

The investigation concluded that the temporary change likely contributed to the incident by making it harder for operators to understand where the smoldering material could be located.

A temporary modification needs technical review, hazard assessment, approval, worker communication and updated operating information. The organisation also needs a defined date or process for its removal.

Previous warning signs were not translated into effective controls

Didion had experienced previous smoldering fires and process upsets. Earlier incidents and inspections had identified combustible dust hazards, including the risk of fires and explosions spreading through connected dust collection systems.

The facility did not adequately address these warnings.

An incident investigation should establish:

  • What happened and under which operating conditions.
  • Which safeguards were expected to prevent or limit the event.
  • Why those safeguards were missing, ineffective, or bypassed.
  • Whether similar conditions exist elsewhere in the facility.
  • Which corrective actions are needed.
  • How the organisation can verify that those actions work.

Organisations also need to review near misses and inspection findings. A hazard remains serious even when it has not yet caused a fatal incident.

Emergency communication was not sufficient

When employees noticed smoke and fire, they attempted to communicate the emergency by radio. The CSB found that conflicting radio traffic caused confusion. Workers away from the initial fire did not receive the warning they needed before later explosions.

The investigation identified the lack of an effective facility-wide notification system as an emergency preparedness weakness.

Industrial sites need to check how alarms and evacuation instructions reach workers in noisy areas, restricted spaces, and locations away from the initial incident.

Which US safety standards applied?

The Didion investigation also shows why organisations need to check which regulations apply to their operations.

The CSB report notes that OSHA’s Grain Handling Facilities Standard, 29 CFR 1910.272, did not contain a general requirement for a management-of-change programme at the time of the incident.

Two US standards are relevant when reviewing the case:

The Process Safety Management standard applies only to processes within its defined scope and threshold criteria. It is not a universal requirement for every industrial facility.

Read the CSB’s Didion Milling investigation report and its final investigation announcement.

How to improve safety compliance at industrial sites

Improving safety compliance requires regular hazard checks, suitable controls and clear responsibility for follow-up. The following practices can help organisations review their safety activities.

1. Identify hazards through routine and task-specific assessments

Incident records describe events that have already occurred. They cannot show every hazard present during the current shift.

Hazard identification should include scheduled inspections, task-specific assessments, worker observations, near-miss reports and investigations of abnormal operating conditions.

A routine inspection may identify a damaged guard on a conveyor. A job hazard analysis for maintenance work on the same conveyor may identify additional risks from stored energy, unexpected movement and access to the work area.

Organisations should review:

  • Non-routine maintenance and cleaning.
  • Temporary equipment modifications.
  • New materials or chemicals.
  • Changes to production processes.
  • Contractor activities.
  • Simultaneous work in nearby areas.
  • Changes in environmental or operating conditions.

The OSHA guidance on hazard identification and assessment recommends examining workplaces for existing and potential hazards, investigating incidents and near misses, and involving workers in hazard identification.

Risk assessments need to reflect the work being performed. A document prepared before a major equipment or process change may need to be reviewed.

2. Apply the hierarchy of controls before relying on PPE

A safety programme should not treat personal protective equipment as the default response to every hazard.

The NIOSH hierarchy of controls sets out five levels of risk control:

  1. Elimination: Remove the hazard.
  2. Substitution: Replace it with a less hazardous alternative.
  3. Engineering controls: Isolate people from the hazard.
  4. Administrative controls: Change how work is organised or performed.
  5. Personal protective equipment: Protect workers from remaining exposure.

The first three approaches reduce or isolate hazards with less dependence on individual behaviour.

A worker exposed to a moving machine component may need gloves and training, but these do not replace suitable machine guarding or isolation.

Combustible dust needs a dust hazard assessment, suitable equipment design safeguards and housekeeping controls. Additional PPE alone cannot prevent an explosion from spreading through connected equipment.

PPE remains necessary when exposure cannot be eliminated or reduced enough through other controls. It forms one part of a wider safety programme.

3. Establish a hazard-reporting and corrective-action process

Workers need a clear way to report unsafe conditions, near misses and procedural problems. Each report needs a response.

A complete process connects the observation to a verified action:

01

Observation

Record the unsafe condition, near miss or procedural problem, including its location and relevant details.

02

Risk assessment

Assess the reported condition and determine the appropriate response, including whether equipment needs to be taken out of service.

03

Action owner

Assign the corrective action to an authorised person responsible for addressing the issue.

04

Corrective action

Record the repair, replacement or other action taken to address the reported condition.

05

Verification

Verify that the action has addressed the problem and that the equipment or work area is safe.

06

Closure

Close the report with evidence of the completed action and retain the record for review.

If the same cable damage appears again, the organisation needs to examine the cause. The cable may pass through a high-traffic area, lack suitable protection or be moved during routine work.

The OSHA worker participation guidance supports employee involvement in hazard reporting, incident investigation and safety programme reviews. Workers should receive feedback on the concerns they raise.

Safety tracking software can help teams record findings, assign owners, set due dates and monitor corrective actions. The software needs to support the organisation’s reporting and review process.

4. Verify controls at the point of work

A procedure describes what should happen. Field checks establish whether the required conditions exist when work takes place.

For maintenance activities, this may include confirming equipment isolation, checking barriers, reviewing access arrangements and ensuring workers understand the precautions for the task.

For confined-space work, checks may cover entry authorisation, atmospheric testing, isolation, communication and rescue arrangements under the applicable regulations.

For hot work, checks may cover ignition sources, combustible materials and fire protection.

The checks need to match the hazard and the approved procedure. A generic checklist cannot replace a competent assessment of the actual worksite.

Permit-to-work systems help control specified hazardous activities. A permit-to-work system records the work scope, authorisation and required precautions before the task begins. The process may also require checks during the job, and formal closure after work is complete.

A signed permit does not confirm that conditions remain safe throughout the task. Workers and supervisors need to check the work area when conditions change.

Digital inspection and workflow tools can help workers capture field observations, photographs, readings, and completion records. Supervisors can review the evidence and follow up on open findings. Learn more about digital inspection software.

5. Treat management of change as a safety-critical process

The Didion incident shows why temporary process modifications need careful review.

Management of change (MOC) is a process for assessing changes to equipment, processes, materials, procedures or organisational arrangements before they are implemented.

For processes covered by OSHA’s Process Safety Management standard, 29 CFR 1910.119(l) requires written procedures for managing covered changes, except replacements in kind. The review must consider the technical basis for the change, its effect on safety and health, required procedure updates, the time period for the change, and authorisation requirements. Affected operating, maintenance and contract employees must receive information and training before the changed process starts up.

For organisations outside the standard’s scope, MOC remains an important safety practice. Legal requirements depend on the industry and jurisdiction.

An MOC review should establish:

  • What is changing and why.
  • Whether the change is temporary or permanent.
  • Which equipment, processes, and work areas are affected.
  • Whether the change introduces new hazards or increases existing risks.
  • Whether engineering calculations or specialist reviews are needed.
  • Whether operating procedures and maintenance instructions need updates.
  • Which workers and contractors need information or training.
  • How the change can be monitored and when a temporary change expires.

The review needs people with the right technical knowledge. A production team may understand the operational benefit of a modification, while a process safety specialist may identify risks that need further assessment.

The CSB found that the temporary process modification at Didion had not adequately addressed changes to material loading and airflow. Affected night-shift operators had also not received adequate information.

Approval needs to be followed by technical review, communication, and updated operating information.

6. Make training relevant to equipment and tasks

General safety induction gives workers important information about a site. Workers also need training for the tasks they perform.

Training should reflect job responsibilities, equipment, materials and site procedures.

A maintenance technician working on electrical equipment needs to understand the relevant energy-control procedures. A worker handling chemicals needs access to the correct hazard information and precautions. A contractor entering a restricted area needs to understand site access and emergency arrangements.

Organisations should review:

  • Role-specific training requirements.
  • Practical demonstrations and competency checks.
  • Refresher training after equipment or procedure changes.
  • Language and literacy requirements.
  • Contractor and temporary-worker induction.
  • Access to current procedures at the point of work.

Training records need to be supported by checks that workers can perform their tasks safely.

Digital work instructions can give workers access to approved procedures, visual guidance and equipment information. Telepresenz SmartITM™ supports digital training and knowledge management for frontline teams.

A digital instruction does not establish competency by itself. Supervision, practical assessment and task-specific authorisation remain necessary.

7. Improve communication across shifts and work teams

Safety information needs to reach the people affected by it.

A shift handover should cover open hazards, equipment status, temporary changes, active permits and work that remains incomplete. Supervisors should confirm that incoming teams have received information about changes that affect their tasks.

Contractor coordination also matters. When several teams work in the same area, each team needs to understand the hazards created by nearby activities.

Connected worker software can help frontline employees access approved information and communicate with supervisors or technical teams. A field operations platform can also support task updates, mobile records, and remote assistance.

The value of these tools depends on the quality of the information being shared and the site’s communication procedures.

8. Use digital tools to support safety monitoring

Paper forms and separate spreadsheets can make it hard to review safety records across teams and sites. Digital systems can help workers submit reports from the field and give supervisors a shared view of open actions.

When evaluating industrial safety software, organisations should review whether it supports:

  • Mobile hazard and incident reporting.
  • Digital inspection checklists.
  • Photo and video evidence.
  • Corrective-action assignment and status tracking.
  • Supervisor review and approvals.
  • Access to current work instructions.
  • Offline work and later synchronisation, where required.
  • Reports linked to relevant assets, tasks or work areas.

Safety tracking software can help teams monitor reported hazards and corrective actions. Work safety software may also support digital inspections, task records and worker communication.

For oil and gas operators, oil and gas safety software needs to support the work and risks found at the relevant facilities. Organisations should check requirements for permit control, hazardous-area work, contractor coordination, isolation records and inspection evidence against their own operating procedures and applicable regulations.

An industrial safety platform should fit the site’s existing systems and approval processes. It does not replace engineering controls, competent safety reviews or emergency response procedures.

9. Use computer vision for selected visual safety checks

Computer vision safety tools use cameras and image analysis to identify selected visual conditions in monitored areas.

Depending on the system and deployment, AI safety monitoring may support checks for selected PPE items or visible unsafe conditions. AI PPE monitoring can help flag cases where a worker may not be wearing required protective equipment in a camera-covered area.

PPE monitoring software needs to be assessed against the site’s actual conditions. Camera position, lighting, blocked views, worker movement, and the type of PPE can affect detection.

Computer vision safety monitoring does not identify every hazard. It cannot confirm that a worker has followed every safety procedure or that equipment has been isolated correctly. Human review and site safety controls remain necessary.

Telepresenz SmartEYE™ uses AI-powered computer vision for selected visual safety monitoring. Organisations can read the SmartEYE whitepaper to learn more about its safety monitoring approach.

10. Review safety performance and verify corrective actions

A safety programme needs regular review. Management should examine whether hazards are being reported, whether corrective actions are completed, and whether the controls in place are working.

Useful measures may include:

  • Open hazards by risk level.
  • Time taken to assign and close corrective actions.
  • Repeat inspection findings.
  • Overdue maintenance and safety actions.
  • Training completion and competency checks.
  • Permit review and closure records.
  • Incident and near-miss trends.
  • Verification results for completed corrective actions.

The number of reports alone does not show whether safety performance has improved. A rise in hazard reports may reflect better worker participation. Management needs to review the type of reports, the risks involved, and the actions taken.

Safety reviews should lead to clear decisions, assigned owners, and follow-up dates.

How Telepresenz supports frontline safety workflows

Telepresenz provides digital tools for frontline industrial operations. Its products support different parts of field execution and safety-related work.

SmartOPS™ supports mobile workflows, digital checklists, field data capture, operational reporting and remote assistance. Teams can record observations and visual evidence during field activities. The platform also supports offline work, with information synchronised when connectivity returns.

SmartEYE™ uses computer vision for selected visual safety monitoring, including PPE-related checks. Its performance depends on camera coverage, site conditions and the visual conditions being monitored.

SmartITM™ supports digital training and access to work instructions and operational knowledge.

These products can support parts of an organisation’s safety process. Site teams remain responsible for risk assessments, engineering controls, permit authorisation, worker competency and emergency response.

Explore the Telepresenz products or book a demo to discuss your site’s requirements.

Build a More Connected Approach to Industrial Safety

Give frontline teams better ways to capture field observations, complete digital checklists and share safety-related information. See how Telepresenz supports connected industrial workflows.

Book a Demo   →

FAQs

What is industrial safety compliance?

Industrial safety compliance means meeting the legal, regulatory and internal requirements that protect workers and other people affected by industrial operations. It includes hazard identification, risk controls, training, inspections, incident reporting and corrective actions.

Sites can improve safety compliance by reviewing hazards, applying suitable controls, involving workers, checking equipment, managing process changes and following up on reported issues. Regular reviews help management check whether safety measures are working.

A permit to work system is a formal process for authorising specified hazardous activities. It records the work scope, required precautions, responsible people and approval status. The process may also include checks during work and formal permit closure.

Permit to work software helps organisations manage permit requests, reviews, approvals and records through a digital workflow. Features vary by product. Buyers should check whether the software supports their permit types, approval steps, site rules and reporting needs.

Work permit management software helps safety and operations teams manage work permits and related records. Depending on the product, it may support task details, risk assessments, approvals, isolation checks, attachments, and permit status tracking.

Industrial safety software can give workers mobile forms for hazard reports, inspections, and evidence capture. It can also help supervisors review findings and track corrective actions. The software supports the safety process but does not replace site controls or competent decisions.

Industrial safety software can support activities including inspections, reporting, corrective actions, and training records. Computer vision safety monitoring focuses on selected visual conditions captured by cameras, including certain PPE checks. The two can support different parts of a site’s safety activities.

Connected worker software can help frontline employees access approved information and communicate with supervisors or technical teams. Its value depends on worker access, data quality, and the site’s communication procedures.

The software category may share features across industries, but oil and gas sites can have specific requirements for hazardous-area work, permit control, contractor coordination, isolation and inspection records. Organisations should assess software against their facility’s risks and applicable regulations.


Written by

Indu Tolia, Founder and CEO of Telepresenz

Indu Tolia
Founder and CEO of Telepresenz

Indu Tolia, Founder and CEO of Telepresenz, leads the company’s work to help industrial organizations make frontline work safer, more connected, and more efficient through technology.

Connect with Indu Tolia on LinkedIn

 

See Telepresenz in Action

Talk to us about bringing this into your operations.

Continue reading